Conveyor/In-Motion Weighing RL50210 TA
Easy to install, the RL50210 TA is cost-effective solution for various indoor weighing applications where checking requirements are low, and vibration and shock are high. The popular design utilizes neoprene isolation/compression mounts, allowing for minor misalignment, thermal expansion /contraction and shock absorption.

RL1800 Mild Steel, Stainless Steel Weigh Modules
Combining self-checking and multidirectional movement capabilities, the RL 1800 tolerates movement from the tank  in all directions. The center- pivoted, tension loading design incorporates spherical washers for self centering. The load is suspended on a high-strength bolt instead of the traditional wire rope, providing added durability.

Washdown/Corrosive Weighing RL1900 Stainless
Steel Weigh Modules
With a stainless steel, welded seal load cell, the RL1900 provides a solid solution for washdown environments where height is not a limiting factor. Using loading bolt design, minimal lateral forces are transfered to the load cell. Self-checking and center-pivoted, the RL1900 tolerates movement in all directions.

RL8000HE Stainless Steel, Hermetically Sealed
Weigh Modules
Featuring complete stainless steel construction, the RL8000HE provides long-term reliability, even in washdown and corrosive environments. The low-profile design uses a field replaceable cable to reduce downtime in the event the cable is  damage and features a 300% overload capability.

Paramounts EP and HS Medium-Capacity Weigh
Modules
Designed with a blind load hole, the Paramounts EP and HS low-profile mounts isolate the load cell from unwanted side and eccentric load, providing superior accuracy in applications with extreme expansion, contraction and vibration. Integral jacking/shipping bolts allow quick field removal of load cells and eliminate load cell damage during transport.EP modules provide environmentally protected load cells HS modules provide hermetically-sealed load
cells for use in washdown and corrosive environment.

RLBTM Mild Steel/Stainless Steel Weigh Modules
The new RLBTM mount was specifically created to take advantage of the improved load introduction accuracy of the ball and cup design. This multipurpose mount is ideal for both indoor and outdoor applications, and can be used with a variety of single-ended beam load cells. Available in both mild and stainless steel material, this product offers superior accuracy at an affordable price. These assemblies are also quick and easy to install, making the RLBTM the perfect choice for your low-capacity, multipurpose weighing needs.

220 Universal Mount tank, Bin and Hopper
Weiging Assembly
The 220 Universal Mount is designed to be used with the Model 220 load cell. The mount incorporates built-in jacking bolts to prevent damage to the load cell during installation. Its stainless steel construction is designed to be used in the harshest of environments.

RL2200 Series Tank, Hopper and Vessel Weighing Assembly
The RL2200 Series mounts are ideal for use in tank, hopper, vessel, and many other applications. The low-profile design allows for economical solutions in a competitive marketplace. This rugged, high-precision mount is designed for easy installations and does not require check rods or other stabilizing hardware. The RL2200 mount has the added feature of self centering, allowing for side loads without
sacrificing performance.


RL1600 Series Tank, Hopper and Vessel
Weighing Assembly
The RL1600's low-profile, bolt-in-place design allows the module to be bolted directly to the tank without requiring additional mounting plates. Self-checking movement allows for thermal expansion and contraction and provides liftoff protection. Available in cast iron, mild steel and stainless steel with hermetically sealed design.


EZ Mount I  Tank and Hopper Weighing Assembly
Utilizing a unique self-checking sliding pin design, the EZ Mount allows for thermal expansion and contraction, and controlled scale deck movement with minimal friction.Ideal for applications that require intrinsically safe or explosion proof areas.  These low-profile, bolt-in-place mounts offer NTEP-certified and FM approved load cells. Available in mild steel, stainless steel, and  stainless steel hermetically sealed design.

RL8500 HE Stainless Steel, Hermetically Sealed
Weigh Modules
This new innovative mounting assembly incorporates the load cell and mount into the same piece of hardware. The result is an extremely rugged, low-profile assembly that is capable of operating with very high performance levels in the worst of environmental conditions. Since there is no bulkly mounting hardware to deal with, the insallation of the RL8500 HE is quick and easy.

MagnaMount® Tank, Truck and Railroad Track
Assembly
The MagnaMount is specially designed for accurate performance in adverse heavy-capacity applications where height is not a limiting factor. Teflon-coated load plates offer freedom of movement for greater repeatability. Utilizing a unique "shielded cell" design, this durable weigh module protects the load cell from shock and side load effects, even in hostile environments.

MVS Mount Motor Vehicle/Truck Scale
Designed for the Rice Lake Weighing Systems SURVIVOR® Truck Scale product line, the MVS can also be purchased independently to support existing designs or applications. Built to withstand the punishment of the most severe environments, the MVS utilizes the center-loaded double-ended shear beam design. The mount is self-centering, which eliminates the need of costly check rods. This results in a pendulum suspension effect that eliminates 
binding, protects the load cells from damaging 
side load shocks common on truck scales,
and automatically returns the mount to dead
center. The mount is easy to install, and
promises high performance and long life.