Now you can monitor and control your process from the comfort of your control room or at the site with OTEK Programmable Intelligent Controllers. Use them either as Stand-alone or as part of your DCS or SCADA systems.
 Hi-Q Programmable Intelligent Controllers with Memory cards, modem & R.F. transceiver with their built-in and isolated signal contitioners, it will connect directly to your sensor and/or transducer and it will even power it. All you have to do is to connect and power it up. We will even pregrogram the HI-Q for you if so desired for plug-n-play.
The HI-Q115 is a 101 segment tri-color bargraph
with single or dual 3 digit numeric displays.
Bar-graph operation includes unipolar, bipolar
and 1, 3 or 5 bar "pointer" modes. Bargraph limits
can be shown in three colors. The HI-Q accepts up
to two isolated DC volt or miliamp inputs. Vac,
ma, RTD, thermocouple and strain gage inputs will
be available soon.
 Hi-QTBS Programmable Intelligent Controllers with bargraph-digital LED or LC display:
-Isolated 16 bit A/D (50k counts) w/signal conditioners
-5V, 10-32 VDC: 24 or 90-265VAC power
-Isolated 4-20 mA or 0-5 VDC output
-Four 10A Relays or 8 14A open collector Isolated RS-232C/422/485 I/OASCII
-1 or 2 channel input
- Menu driven kepad
-NEMA4X front panel
-Math functions +, -, x, ±, /
 OTEK Series Megameter
OTEK's new series MEGAMETER is a buy product of its highly successful "HI-Q", series of programmable intelligent controllers and bargraphs. The MEGA series are medium and giant bar-digital displays that give you trend and present representation on your process.
The automtic Tricolor LED bargraph (An OTEK innovation) changes color upon reaching programmable set point (s), either a portion of the bargraph, the complete section or just the pointer. In addition, you can make the display blink or dim via simple serial commands or pre-configure them with OTEK's Navigator (G.U.I.) Use them as simple REMOTE DISPLAYS WITH RS232/422/485 I/O or as STAND ALONE Indicator/Controllers, or as PLC, DCS. SCADA Peripheral. Either indoor or outdoor, they all have duty NEMA4X. (IP65) SANITARY compliant aluminum case or plastic NEMA3 (IP55) double gasketed and powder coated that can be wall or pipe mounted (2 1/4") "U" bolt included) All connections are made through a watertight 1/2" NPT port. A screw terminal connector on the bottom (not watertight) is available on request.
 WIRELESS TRANSCEIVER CONTROLLER
The Series 950 consist of several models having different input & output options, but all sharing the same R.F. Transceiver Board & Controller Board, but different signal conditioning & connector board, all in a miniature housing that can be panel, chassis, DIN Rail, pipe and even wall mounted, weighing a mere 2 ounces.
Wireless R.F. Transceiver: the 950's R.F.XCVR uses the On-Off key (OOK) technique for high reliability communications at speeds of 19,200 Baud in the FCC Licenseless band of 916.5 MHz. Typical indoor range is
200 ft. and line of sight is 600 ft (115.2 Kb on request).
 TR-300 Series
Series TR-300 wireless transceiver is ideal for short range (100ft) from hazardous to safe area communications between computers or other serial devices eliminating the costly wiring. The licenseless TR-300 operates in the 916.6 MHz band at data rates of 19.2KB or 115KB. Just connect your serial port to the TR-300, download our terminal software and start communicating. That is plug & play!
Request quote
|
